diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 59a2713..ba96efa 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -64,7 +64,7 @@
 	kirkwood-pogo_e02.dtb \
 	kirkwood-sheevaplug.dtb
 
-dtb-$(CONFIG_ARCH_OWL) += \
+dtb-$(CONFIG_MACH_S900) += \
 	bubblegum_96.dtb
 
 dtb-$(CONFIG_ROCKCHIP_PX30) += \
diff --git a/arch/arm/dts/s900.dtsi b/arch/arm/dts/s900.dtsi
index 2bbb30a..eb35cf7 100644
--- a/arch/arm/dts/s900.dtsi
+++ b/arch/arm/dts/s900.dtsi
@@ -1,17 +1,94 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Device Tree Source for Actions Semi S900 SoC
-//
-// Copyright (C) 2015 Actions Semi Co., Ltd.
-// Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
 
-/dts-v1/;
-#include <dt-bindings/clock/s900_cmu.h>
+#include <dt-bindings/clock/actions,s900-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/actions,s900-reset.h>
 
 / {
 	compatible = "actions,s900";
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@1f000000 {
+			reg = <0x0 0x1f000000 0x0 0x1000000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
 
 	losc: losc {
 		compatible = "fixed-clock";
@@ -26,28 +103,231 @@
 	};
 
 	soc {
-		u-boot,dm-pre-reloc;
 		compatible = "simple-bus";
-		#address-cells = <0x2>;
-		#size-cells = <0x2>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		ranges;
 
-		uart5: serial@e012a000 {
-			u-boot,dm-pre-reloc;
-			compatible = "actions,s900-serial";
-			reg = <0x0 0xe012a000 0x0 0x1000>;
-			clocks = <&cmu CLOCK_UART5>;
+		gic: interrupt-controller@e00f1000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xe00f1000 0x0 0x1000>,
+			      <0x0 0xe00f2000 0x0 0x2000>,
+			      <0x0 0xe00f4000 0x0 0x2000>,
+			      <0x0 0xe00f6000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		uart0: serial@e0120000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0120000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART0>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
+		uart1: serial@e0122000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0122000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART1>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@e0124000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0124000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART2>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@e0126000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0126000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART3>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial@e0128000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0128000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart5: serial@e012a000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012a000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART5>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart6: serial@e012c000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012c000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART6>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sps: power-controller@e012e000 {
+			compatible = "actions,s900-sps";
+			reg = <0x0 0xe012e000 0x0 0x2000>;
+			#power-domain-cells = <1>;
+		};
+
 		cmu: clock-controller@e0160000 {
-			u-boot,dm-pre-reloc;
 			compatible = "actions,s900-cmu";
 			reg = <0x0 0xe0160000 0x0 0x1000>;
-			clocks = <&losc>, <&diff24M>;
-			clock-names = "losc", "diff24M";
+			clocks = <&hosc>, <&losc>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c@e0170000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0170000 0 0x1000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e0172000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0172000 0 0x1000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e0174000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0174000 0 0x1000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e0176000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0176000 0 0x1000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e0178000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0178000 0 0x1000>;
+			clocks = <&cmu CLK_I2C4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e017a000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe017a000 0 0x1000>;
+			clocks = <&cmu CLK_I2C5>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@e01b0000 {
+			compatible = "actions,s900-pinctrl";
+			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer: timer@e0228000 {
+			compatible = "actions,s900-timer";
+			reg = <0x0 0xe0228000 0x0 0x8000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "timer1";
+		};
+
+		dma: dma-controller@e0260000 {
+			compatible = "actions,s900-dma";
+			reg = <0x0 0xe0260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <12>;
+			dma-requests = <46>;
+			clocks = <&cmu CLK_DMAC>;
+		};
+
+		mmc0: mmc@e0330000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0330000 0x0 0x4000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD0>;
+			resets = <&cmu RESET_SD0>;
+			dmas = <&dma 2>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc1: mmc@e0334000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0334000 0x0 0x4000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD1>;
+			resets = <&cmu RESET_SD1>;
+			dmas = <&dma 3>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc2: mmc@e0338000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0338000 0x0 0x4000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD2>;
+			resets = <&cmu RESET_SD2>;
+			dmas = <&dma 4>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc3: mmc@e033c000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe033c000 0x0 0x4000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD3>;
+			resets = <&cmu RESET_SD3>;
+			dmas = <&dma 46>;
+			dma-names = "mmc";
+			status = "disabled";
 		};
 	};
 };
-